TG Metals Limited has updated its Mineral Resource Estimate (MRE) for the Van Uden Gold Project in Western Australia to conform to the JORC 2012 standards. The revised in‐pit resource outlines a continuous gold deposit stretching along a 2.5‐km strike, with total reportable resources of 6.35 million tonnes graded at 1.15 g/t for approximately 227,140 ounces of gold. The estimate is based on an optimum pit shell design at a 0.35 g/t cut‐off grade and integrates historical drilling data along with updated geological interpretations. The project’s diverse mineralisation styles—from laterite to oxide, transitional and fresh zones—underscore technical indicators such as the extensive drilling database and advanced wireframing methods that were crucial in defining sub-domains, enhancing the confidence in resource continuity. The announcement details how past mining at the Tasman and Dieman pits has been accounted for in the block modelling process by depleting these areas. It also describes promising extensions; the deposit remains open along its down-dip eastern margin and beyond previously modelled depths in the Tasman area, hinting at further resource growth. The technical work employs ordinary kriging with carefully selected block sizes (down to 12.5 m x 12.5 m x 5 m and sub-celled to 2.5 m x 2.5 m x 0.625 m) to optimize grade estimation. In addition, the project benefits from proximity to established toll treatment facilities, which could help streamline future production. From a market sentiment perspective, the news carries bullish undertones. The rigorous update to international reporting standards enhances transparency and builds investor confidence while the encouraging technical indicators—such as a robust geological model, clear continuity of mineralization, and potential for expansion through infill drilling—suggest that the Van Uden Project is well positioned for future growth. On the other hand, some bearish concerns remain: the reliance on historical production data and technical assumptions to define parameters such as cut-off grades and mining recovery rates highlight the inherent risks in transitioning from resource estimation to production, and uncertainties in future drilling results may temper short-term outlooks. Overall, the updated MRE represents a significant technical milestone for TG Metals Limited as they advance toward production, offering both opportunities and challenges for early-stage traders.